1. With the "black box" function, the historical data in the machine can be downloaded through USB to provide the basis for the traceability of water samples;
2. Compared with the single-stage RO system, the water quality is better, and the content of ions, organic matter and heat source is lower;
3. Intelligent diagnosis function of instrument status;
4. One-key fast quantitative water dispensing function;
5. Special consumables identification function (optional);
6. TOC online display (optional);
7. User management function (authorized users can use the device).
8. The user can set the maximum amount of water to be taken at one time (to prevent the overflow and damage of the water container when the water container is full of water);
9. PLC control system, touch display screen, convenient and efficient man-machine dialogue;
10. Graphics and texts display system diagnosis results, combined with warning sounds to ensure safer water use;
11. The outlet flow rate of RO pure water is 2.0 liters/min (water from the tap of the water tank), and the outlet flow rate of UP ultrapure water is 1.0 to 1.5 liters/minute.
Technical indicators:
| model | UPR-II-5/10/15TNZ UPR-II-5/10/15TNZP |
UPR-II-5/10/15TN UPR-II-5/10/15TNZ |
| Influent water source | Urban or groundwater (TDS＜1000ppm), water pressure 0.10~0.40MPa, water temperature 5-45℃ | |
| water production | 5/10/15 liters/hour | |
| RO effluent quality | RO pure water conductivity: 1~5μS/cm (online monitoring) | |
| UP effluent quality | Heavy metal ions≤0.1ppb; microparticles≤1/ml | |
| Working power | AC220V/50Hz (power: 150W) | |
| Host size | 375×500×620(mm) | |
| weight | 30-35kg | |
| Scope of application | Atomic Absorption (AAS) / Atomic Emission (AES); Ion Chromatography (IC) |
Plasma Emission Chromatography (ICP) High Performance Plasma Chromatography (HPLC) |
| Tank configuration | TNZP and TNP models are equipped with a 30-liter open water tank, and TN and TNZ models are equipped with a 15-liter pressure tank The inner layer of the special double-layer open water tank is made of medical-grade PE, which is non-polluting and fully enclosed to ensure effective isolation from the air. It has a convenient cleaning interface to facilitate the cleaning of the water tank. |
|
Ordering instructions:
1. The water production volume of this product refers to the rated water volume of RO when the water temperature is 25°C. For every 1°C drop in the water temperature, the RO membrane water production decreases by about 3%. When the water temperature is lower than 5°C, the RO membrane will stop producing water. When selecting and ordering, the factors of water temperature drop in winter in the region must be considered;
2. The appearance and color of the chassis are subject to the actual product.
